Last updated: 28-September-2011

- Version: 8.02.009
- Build: 8.2.34.09
- Platform Version         : 1.10.1004 (Release)
- Package GUID             : 5AF89004-1F93-4170-AFA3-491D094AA531
- N2X HardwareDiagnostics  : 4.30

ENHANCEMENTS:
  - Windows 7 (32-bit, 64-bit) support

IMPORTANT USAGE NOTES:
  - AmpDhcpd service should be running (DHCPNT is obsolete)
  - For Windows 7 OS only
	- "Internet Protocol Version 6(TCP/IPv6)" setting should be Unchecked/Disabled in all Network Connections
  - Please connect Lindy USB Ethernet Adaptor to MDI-X LAN Port of the Chassis
  - Please make sure windows restart is not pending before installing protocol analyzer  
  - If you get an error message: 'The system DLL user32.dll was relocated in memory. The application will not run properly. The relocation occurred because the DLL C:\Windows\System32\Hhctrl.ocx\ occupied an address range reserved for Windows system DLLs. The vendor supplying the DLL should be contacted for a new DLL.',
    Please install the Microsoft patch 935448 from http://support.microsoft.com/kb/935448/en-us
	
  
KNOWN ISSUES:
  - Following Known issues exist
    - For Gen1/Gen2 Module type (online/offline):
      - SAD00389847  Selftest does not work  
    
    - For Gen3 Module type (offline viewer):
      - Performance Summary , Flow control Analysis hangs while working on Gen3 Traces

    - Error pops in between installation on clean XP machine(SAD00442546) but Installation works fine.
      -`Error 1904 Module C:\Program Files\Agilent\SPT\Platform\bin\delegate.dll failed to register.."




FEATURES WHICH ARE NOT SUPPORTED: (SPT CONTROL PANEL)

  - Session Manager
  - License Manager
  - Dummy Module Manager
  - Collect Diagnostics
  - Diagnostics Tool
	o Run functional tests
	o Run internal tests
	o Run system test